Discontinued 3" Innoflue SW Tee Cap w/ Drain

The ISTCD03 from Centrotherm is a Tee Cap w/ Drain for use with 3” Innoflue SW vent pipes. This tee caps allows for vertical condensate drainage in a Innoflue SW (Single Wall) vent pipe system. Drain OD is 1.26". Requires IANS03 connector ring (not included). Install using IACE50 Centrocerin.

Features:

  • Innoflue SW (Single Wall) is the only polymer vent system on the market listed to UL 1738;
  • Accepted and approved by over 50 North Amercian manufacturers of boilers, water heaters and furnaces;
  • Suitable for natural gas, propane and fuel-oil condensing and non-condensing (flue temp. below 248°F) appliances;
  • All parts (pipe, fittings, etc. - both black and grey) are UV resistant and suitable for indoor or outdoor installation;
  • Requires no primer/glue and does not leach chloride like PVC & CPVC;
  • Costs less and is faster and easier to install than stainless steel venting, no special tools needed, zero clearance to combustibles;
  • Industry-leading 2mm wall thickness;
  • Built-in gasket allows for adhesive-free installation which can be adjusted at any time;
  • May be installed through a wall, chimney, chase or between joists;
  • Lightweight, requires minimal support;
  • Made in the USA from environmentally-friendly PolyPropylene (PP).
Size
3"
Product Type
Condensate Drains
Vent Type
Single Wall
Brand
Centrotherm

3" Innoflue SW Tee Cap w/ Drain

  • Views: 1489
  • 3" Innoflue SW Tee Cap w/ Drain QR Code
    QR
  • Brand: Centrotherm
  • Model: ISTCD03
  • MPN: ISTCD03
  • Availability: Discontinued
  • $ 71.05

Tags: Vent Pipes, Heating, Heating Supplies, Condensing Boilers, Heating and Cooling